|
| KIT
INCLUDES: |
• (3)
Puck Lights for
recessed (flush)
mounting.
• (3)
Housings for surface
mounting.
• (3)
12V- Low Voltage 20w
JC Bi-Pin Halogen Bulbs.
• (1)
UL Listed 60W Transformer
with Cord & Plug
end.
• (6)
Mounting Screws.
• (1)
Terminal Block.
NOT
RATED FOR DIRECT CONTACT WITH INSULATION |
 |
Images Showing Different Views |
 |
Specifications |
• Puck
Lights: Comes
with (3) Puck Lights with two torsion clips for recessed
(flush) mounting applications.
• Housings: Comes
with (3) Housings
for surface mounting
applications. Dimensions
shown below.
• Material: All
metal with plastic Trim Ring. Otherwise the body, the clip, the reflector
and housing are all metal. There are
units sold out there on the web and in home centers that are ALL plastic. These
ALL plastic units can only
take up to a 10w bulb and in time have been reported to either melt, warp
and even completly fall out of thier
place from the heat. Our lights will never do this because of thier metal design,
plus our lights can handle
up to 20 watts, (you can always dim them or put a smaller bulb
in).
• Diffuser: Comes
with clear tempered glass lens diffuser.
• Voltage
/ Wattage : 12V
Low Voltage System. Each
Puck Light is 20 Watts max ,
total of 60 Watts max.
• Bulbs: Comes
with (3) 20 Watt JC Halogen BI-PIN Bulbs.You can now purchase EXCLUSIVELY
from us the
JC BI-PIN XELOGEN Bulb, which
is available
in 10 & 20 Watts.Click Here
for details of this revolutionary XELOGEN
bulb. We highly recommend using the xelogen bulb with
this item and not just for the longer life of the
Xelogen bulb, but also because it produces LESS Heat. High temperature is typical
with small light fixture such
as these Puck Lights whether you buy them from us or from anyone else, therefore
by using the XELOGEN
bulb in this fixture you help substantially reduce the heat typically caused
by HALOGEN bulbs.
Click
here for more on this.
• Reflector: Built
in reflector helps increase light output while helping to dissipate heat.
• Location: NOT rated
for direct contact with insulation.
• Transformer: Comes
with dimmable UL
Listed 60 Watt 12V Low Voltage transformer that plugs in to a 120V receptacle.
Dimensions shown below.
|
| Dimensions |
Dimensions/sizes and specifications are subject to change without notice. We
try our best
to keep dimensions/sizes
accurate but
it is not always
possible. If
EXACT dimensions/sizes
are a necessity
for your application
we highly recommend
consulting with
us before purchasing.
We also strongly
suggest that
you please carefully
read our entire
terms of sale
posted on this
website before
purchasing. |
|
How it Works |
These
Puck Light KITS are designed
to be surface mounted
or recessed mounted.
This KIT comes with parts
to allow you to do either
application. See below
images which will give
you a better idea of
how easy this versatile
KIT is to install
for either surface mounting
or recessed mounting
applications. Great for
undercabinet lighting,
shelf lighting, up lighting,
cove lighting, task lighting...
simply use your imagination.
|
| How
it Works when SURFACE mounting |
If
you plan to surface
mount, simply insert the
Puck Light into the
Housings while squeezing
the two pre-attached
torsion clips.
Puck Light will automatically
attach itself via the
pressure from the torsion
clips. See below image.
Make sure to feed the
cable through the Housing.
The Housings have two
pre-punched "knock-outs" for
the cable. The Housings
also has two pre-drilled
holes for mounting
to the surface. See
below images.
NOT rated
for direct contact with insulation. |
 |
How
it Works when RECESSED mounting |
If
you plan to recess
(flush) mount, simply
insert the Puck Light
into the hole where
they will be mounted
using the two pre-attached
torsion clips.
NOT rated
for direct contact with insulation. |
 |
