|
| Each
Individual LED Puck
Light INCLUDES: |
• (1)
LED Puck Light for
recessed (flush)
mounting.
• (1)
Housing for surface
mounting.
• (1)
12V- Low Voltage 20
Watt LED Bulb, in
your choice of Cool
white or Warm white. This
LED bulb provides
an output equivalent
to 20 Watts, but draws
only 1.5 Watts.
• Attached
cable.
• (2)
Mounting Screws.
NOT
RATED FOR DIRECT CONTACT WITH INSULATION |
 |
Images Showing Different Views |
 |
Specifications |
• Puck
Light: Comes
with two
torsion clips
for recessed
(flush) mounting
applications.
• Housing: Comes
with (1) Housing
for surface
mounting
applications. Dimensions
shown below.
• Material:
All
metal with plastic
Trim Ring. Otherwise
the body, the clip, the
reflector and housing
are all metal. There are
units sold out there
on the web and in home
centers that are ALL plastic. These ALL plastic units can only
take up to a 10w bulb
and in time have been
reported to either
melt, warp and even
completly fall out
of thier
place from the heat.
Our lights will never
do this because of thier metal design, plus our lights
can handle
up to 20 watts, (you can always dim them
or put a smaller bulb
in).
• Diffuser: Comes
with clear tempered glass lens diffuser.
• Voltage
/ Wattage : 12V
Low Voltage 20 Watts max. Each LED Puck Light draws 1.5 Watts.
• Bulb: Comes
with a 20 Watt Spot LED
Bulb in your
choice of Cool White (7000 Kelvin)
with 77 lumens or
Warm White
(3100 Kelvin) with 55 lumens. This
LED bulb provides an output equivalent to 20 Watts, but draws only
1.5 Watts.
• Reflector: Built
in reflector helps increase light output while helping to dissipate heat.
• Location: NOT rated
for direct contact with insulation.
• Requires: Does
NOT come with a Transformer. Requires a 12V
Transformer. Click here for our
Indoor Transformers.
|
| Dimensions |
Dimensions/sizes and specifications are subject to change without notice. We
try our best
to keep dimensions/sizes
accurate but
it is not always
possible. If
EXACT dimensions/sizes
are a necessity
for your application
we highly recommend
consulting with
us before purchasing.
We also strongly
suggest that
you please carefully
read our entire
terms of sale
posted on this
website before
purchasing. |
|
How it Works |
This
LED Puck Light is designed
to be surface mounted
or recessed mounted.
Comes with parts
to allow you to do either
application. See below
images which will give
you a better idea of
how easy this versatile
LED Puck Light is to install
for either surface
mounting or recessed
mounting applications.
Great for undercabinet
lighting, shelf lighting,
up lighting, cove lighting,
task lighting... simply
use your imagination.
|
| How
it Works when SURFACE mounting |
If
you plan to surface
mount, simply insert the
LED Puck Light into the
Housing while squeezing
the two pre-attached
torsion clips.
LED Puck Light will automatically
attach itself via the
pressure from the torsion
clips. See below image.
Make sure to feed the
cable through the Housing.
The Housing have two
pre-punched "knock-outs" for
the cable. The Housing
also has two pre-drilled
holes for mounting
to the surface. See
below images.
NOT rated
for direct contact with insulation. |
 |
How
it Works when RECESSED mounting |
If
you plan to recess
(flush) mount, simply
insert the LED Puck Light
into the hole where
they will be mounted
using the two pre-attached
torsion clips.
NOT rated
for direct contact with insulation. |
 |
