|
| KIT
INCLUDES: |
• (3)
LED Puck Lights for
recessed (flush)
mounting.
• (3)
Housings for surface
mounting.
• (3)
12V- Low Voltage 20
Watt LED Bulbs, in
your choice of Cool
white or Warm white. These
LED bulbs provide
an output equivalent
to 20 Watts, but draw
only 1.5 Watts.
• (1)
UL Listed 60W Transformer
with Cord & Plug
end.
• (6)
Mounting Screws.
• (1)
Terminal Block.
NOT
RATED FOR DIRECT CONTACT WITH INSULATION |
 |
Images Showing Different Views |
 |
Specifications |
• Puck
Lights: Comes
with (3) LED
Puck Lights with two
torsion clips
for recessed
(flush) mounting
applications.
• Housings: Comes
with (3) Housings
for surface
mounting
applications. Dimensions
shown below.
• Material:
All
metal with plastic
Trim Ring. Otherwise
the body, the clip, the
reflector and housing
are all metal. There are
units sold out there
on the web and in home
centers that are ALL plastic. These ALL plastic units can only
take up to a 10w bulb
and in time have been
reported to either
melt, warp and even
completly fall out
of thier
place from the heat.
Our lights will never
do this because of thier metal design, plus our lights
can handle
up to 20 watts, (you can always dim them
or put a smaller bulb
in).
• Diffuser: Comes
with clear tempered glass lens diffuser.
• Voltage
/ Wattage : 12V
Low Voltage System. Each
LED Puck Light is 20 Watts max ,
total of 60 Watts max. Each
LED Puck Light draws 1.5 Watts.
• Bulbs: Comes
with (3) 20 Watt Spot LED
Bulbs in your
choice of Cool White (7000 Kelvin)
with 77 lumens or
Warm White
(3100 Kelvin) with 55 lumens. Each of
these LED bulbs provide an output equivalent to 20 Watts, but draw
only 1.5 Watts.
• Reflector: Built
in reflector helps increase light output while helping to dissipate heat.
• Location: NOT rated
for direct contact with insulation.
• Transformer: Comes
with UL
Listed 60 Watt 12V Low Voltage transformer that plugs in to a 120V receptacle.
Dimensions shown
below.
|
| Dimensions |
Dimensions/sizes and specifications are subject to change without notice. We
try our best
to keep dimensions/sizes
accurate but
it is not always
possible. If
EXACT dimensions/sizes
are a necessity
for your application
we highly recommend
consulting with
us before purchasing.
We also strongly
suggest that
you please carefully
read our entire
terms of sale
posted on this
website before
purchasing. |
|
How it Works |
These
LED Puck Light KITS are
designed to be surface mounted
or recessed mounted.
This KIT comes with parts
to allow you to do either
application. See below
images which will give
you a better idea of
how easy this versatile
KIT is to install
for either surface mounting
or recessed mounting
applications. Great for
undercabinet lighting,
shelf lighting, up lighting,
cove lighting, task lighting...
simply use your imagination.
|
| How
it Works when SURFACE mounting |
If
you plan to surface
mount, simply insert the
LED Puck Light into
the Housings while squeezing
the two pre-attached
torsion clips.
LED Puck Light will
automatically attach
itself via the pressure from the torsion
clips. See below image.
Make sure to feed the
cable through the Housing.
The Housings have two
pre-punched "knock-outs" for
the cable. The Housings
also has two pre-drilled
holes for mounting
to the surface. See
below images.
NOT rated
for direct contact with insulation. |
 |
How
it Works when RECESSED mounting |
If
you plan to recess
(flush) mount, simply
insert the LED Puck
Light into the hole
where they will be mounted
using the two pre-attached
torsion clips.
NOT rated
for direct contact with insulation. |
 |
